Welcome, Inez

It’s as though by saying I wasn’t sure in my last post, I issued myself a challenge. As soon as I clicked the save button, I started thinking about how I would like Inez to look & what fabrics I would use.

Challenge accepted, I guess. 😀

I’m using the Cloth Lady pattern from Elizabeth Stewart Clark. I can’t say enough about the quality of her patterns. The quality of instruction and the breadth of options truly makes each person’s creation a one-of-a-kind customized for them.

An excellent pattern!

While the instructions advise to paint the face and hair, inspired by Dottie, I decided to embroider her face and hair. The more I embroider, the better I get – even though my skill is still limited to chain stitching and simple things. I also recently purchased a McCall’s pattern for a cloth doll inspired by patterns in vintage ladies magazines, and they advise making the back of the hair in long straight stitches. I decided to put in a bun – since that’s a very common hair treatments for ladies – and also the long straight stitches. It was a ton of work but it looks lovely. I also could have made a bun from floss wrapped into a coil and tacked onto her head but I didn’t think about that until she was completed.

Embroider first, then assemble

Putting her together is fairly quick once the face and hair is completed. I used natural cotton that came by the pound this time instead of the roughed up cotton balls and it’s much nicer to work with. To reach the top of her head I used a long chopstick. I stitched in her fingers, elbows and knees as well.

Once she was completed, Inez needed clothing! First came undergarments of course. I just love the chemise pattern in this book. It’s made on a double fold, so there’s no shoulder seam and is incredibly easy to complete. I pleated the centers on this one but you also have the option to gather the centers. I had two bits of trim that were exactly the right length for the sleeves. Perfect!

I have seen some fancy corsets with flossing on the front which is why I put these two red V-shapes on the front of the stays. I’m not sure if they serve any practical function IRL but here they designate which edge is the lower one.

Fully dressed

And then I made this adorable wrapper. I have a wrapper made from this same fabric and yes, I do plan to take a picture with her when we are dressed the same. I forgot to take a picture of her petticoat – it’s crisp white cotton with two pleats and I starched it for fullness.

The pattern book includes multiple bodice and sleeve options, undergarments, outer wear, and more. I also made a low bodice dress in a sheer fabric with a chemisette, but I will show you that in the next post. I need to keep making things to fill up her trunk before the event in September! Come back again soon to see what I’ve completed next.

Advertisement

Tudor Dolls

A couple years ago I discovered the beautiful doll creations of Tasha Tudor. I have written about them in other posts, and one consistency is that there is little information to be found so far about the dolls she designed, how many she designed, or any descriptions such as what inspired her designs. I am aware that Tasha Tudor loved dolls and is famous for her books and drawings.

For me, it started with Nell. This lovely doll was my first china doll and my first Tudor doll. She has quite a lovely face, black hair, red lips and a slight pink on her cheeks. Nell was produced in 1977 and stands about 12″ tall. I liked working with her so much I made her two dresses, a corset, multiple chemises. She currently wears the gray 1866 promenade dress that I detailed in this post.

The next Tudor doll to come my way was Emma. Emma Tudor was produced in 1974 and came to me wearing a very purple polyester dress. I chose to redress her in an 1876 child’s dress detailed in this post. I don’t particularly love the fact that her cloth arms show, but I love the work that went into her dress and that it is drafted from an original French magazine. It was a tremendous amount of work, so I doubt I’ll change her clothes any time soon. Frankly I’m considering how to make her a hat. Emma is 14 1/2″ tall and has a decidedly child-like look.

The next Tudor doll I worked on was one I built completely. Styled as a Meg Tudor, I changed her name to Hannah. This doll was produced in 1976 but others are dated up to 1983. Here, Meg/Hannah is styled in an 1870s bustle dress. She is tiny, only 11 1/2″ tall! I detailed the creation of her costume in this post.

I had frequently seen Sally Tudor dolls, and wasn’t completely captivated by them until I saw this one. I didn’t want to build another doll, so the fact that Sally appeared to be well made and dressed nicely was a plus for me. Sally was produced in 1979 and is another diminutive doll standing around 11″. She is also rather child-like to me with her short haircut, and even feels a little bit 20th century. She has blue eyes and her dress is well made but a bit too long. I won’t change it any time soon.

After Sally, I thought maybe those were all the dolls Tasha Tudor designed. Four dolls from 1974-1979 doesn’t seem like too much or too little, and these were the dolls I would see on Ebay all the time. Then one day, just for kicks, I searched for Tudor Doll, and found two more!

First was Julia, produced in 1973. I don’t know much about her except to say that she is quite tall! She stands about 20″ in height. Also note her hair is styled with a crown and braid, perhaps for a ball. Her clothing was pinned on her, and features an open neckline which made me think of the ball. At some point I’ll make her a new dress as this one is cotton and I’d like to make her a ball gown in satin. I think.

Next is Lady Patricia. There were actually two of these on ebay and I had never seen her at all in the past several years. Poor Patricia was completely naked and I had this petticoat that I had originally made for Emma. It fits her perfectly. Patricia Tudor was produced in 1973 and stands about 12” tall. I’ll have to make her some clothes of course and her hairstyle of a pretty up-do will inform her style.

So there you have all of my Tasha Tudor dolls! If there are more out there I am not aware of them but would love to know about them. There is just something about the glossy finishes and the fine features that I really like. If you know of additional Tasha Tudor dolls please let me know!

Meg March

I admit it has been decades since I last watched a Little Women film so I had to refer to the crib notes for a bit of background on Meg. She is the oldest of the 4 sisters and what I read described her as fun loving with a penchant for luxury.

I purchased this Yield House Meg doll completed with the intention of remaking her clothing. As a young woman she would have wanted to wear the latest fashions and not the frumpy frock she arrived in. Since I have been wanting to explore this category for a while it seemed the perfect opportunity.

Red and black with obvious box pleats

Looking at Victorian fashion plates and photos from the mid 1860s I was consistently drawn to the Garibaldi shirtwaist and skirt combination. This was a high fashion look and was sometimes paired with a bolero jacket. On a small scale I decided just the shirtwaist and blouse would be sufficient.

Inspiration drawing

In a previous post I detailed how I made Meg a cage crinoline. She arrived with a decent set of drawers and one petticoat I reused. Additionally I made her a chemise and petticoat of fine lawn.

New chemise & petticoat
Cage crinoline and underpetticoat

I found a lovely red silk charmuse at a local yardage store and originally thought to make her skirt in black velvet. It might have been made that way originally but I realized working the waist would be complicated and it would likely turn out bulky. Taking to eBay I found a remnant on Japanese kimono silk.

I’m getting better at drafting patterns for dolls but I feel I could have done better on this shirtwaist. It’s not my best output. I like the skirt – it’s made with double box pleats and I loved the hand of the silk. So nice to work with! But honestly I like her undergarments better.

C’est la vie I suppose!

Making a cage crinoline for your doll

For historical costumers, a cage crinoline is a necessity, but you may ask yourself what exactly that is. Modern lingo for this garment is “hoop skirt” which describes a skirt with hoops in it, typically made with plastic bands and sometimes flounced. But for the original cast, a cage crinoline was a modernization of the crinoline petticoat. A crinoline petticoat was a starched cotton underskirt, often times many layers were worn to achieve the desired bell shape to a skirt. In 1856, however, the cage crinoline was patented and allowed women to achieve the shape without all the heavy skirts! They were made with steel bands – not heavy ones – that were strong enough to carry the weight of one or two petticoats on top, plus the skirt of the dress being worn.

And of course, where fashion for people goes, so goes fashion for dolls. There are remaining doll-sized cage crinolines in private collections, and they are of course on a smaller scale and not as robust as human sized garments. They can be used to fill out a skirt for a doll, or simply for the fun of putting a hoop skirt on your dolly.

Looking at how the originals were constructed, I realized this is a simple project I could make and share the instructions here. My doll is an 18″ Yield House Meg doll, but you can adjust these measurements to fit your dolls.

Supplies

I found this trim that is 5/8″ wide, 95% cotton and reminds me of Petersham. It’s a nice woven, flat trim that will do nicely. I’m also using some aluminum jewelry wire here but you can use what is available to you. You want something that is malleable enough to bend into your shape but strong enough to hold the round hoop shape once completed. All told, I spent less than $10 on the supplies.

First you need to do some thinking and measuring. For a Yield House doll, the skirt is made from a 36” length of fabric. This results in a nicely full skirt similar to those worn in the 1860s. Consider how tall your doll is and how full her skirt is. You want the bottom hoop to be less than the full circumference of the outer skirt. I chose to make the bottom hoop 30” around. The top hoop should be wide enough to fit over the hips of your doll. Meg here needed 15” for decent clearance. For the middle bone I split the difference and made it 23”

Once you have your hoop circumferences, measure your wire to that length plus 2-3” overlap. Cut the wires and then twist the ends together.

Twist the ends together

Make all three hoops, then you can measure the tape to cover them exactly. Allow at least 1/2” on either end to turn the raw edges under. Beginning at the joint, fold the tape around the wire to encase it and then whipstitch it closed.

I used quilting thread but any type will do

Once you get to the end, tuck the end under and whip all the way around the joint.

Bring the folds together and stitch

Repeat on the second and third hoop until all three are covered. The next step will be to find the quarters on each hoop and place a small mark. This will ensure the vertical tapes will hang straight. these marks will be covered, don’t worry.

Mark the quarters

Determine the drop of your hoop skirt next. This is the length from the waist to where you want the lowest bone. I chose a 9 1/2” drop so the lowest bone would be near the tops of the doll’s boots. This is about where my life size hoops hang as well. Consider you need 1/2” on either end to tuck under – so add this onto the drop measurement. This gave me a 10 1/2” vertical tapes. Cut 4 of these. Don’t forget to measure the waist of your doll and cut a waistband to that length plus 1”.

The hoops should be equally spaced on your vertical tapes. Don’t forget that you will attach them at the top and the bottom. I measured and pinned the placement for the first and second hoop. The hoops attach at 3”, 6 1/2”, and 10” (the bottom).

Beginning with the lowest hoop, wrap the tape around so the raw edge will be enclosed. Stitch that in place. Repeat at all four quarters.

Enclose the raw edge

Moving to the middle bone, fold the tape over the hoop so you can stitch through the vertical tape, through the hoop covering under that, then out the vertical tape. You aren’t stitching behind the hoop wire, just catching the tape wrapping it. Repeat on all quarters and then move on to the top hoop.

Pin it into place until you stitch it

Once all the hoops are attached to the vertical tapes you are ready to attach the waistband. Turn the ends of the waistband under and stitch so the raw edges are inside. Remember, the waistband is the measure of your doll’s waist plus 1”.

Finished edges

Find the quarters of the waistband, place a small mark, then pin the tapes in place.

Stitch these in a square that will secure the tape and keep the raw edge inside. Once that has been done you can add a hook and eye or thread bar. You are done!

My doll happens to have a modesty petticoat under her new cage crinoline and then a fine starched cotton petticoat over it. I’m making a silk skirt for her next and this should do nicely to help it hold it’s shape.

All told I used less than the full amount of wire I purchased and less than a full spool of the white tape. Had I made the vertical tapes in white I might have used close to the full spool. I hope you found this little article helpful in demystifying the cage crinoline and will feel confident in trying one for yourself!

Supply List

5/8” Petersham or similar woven cotton flat trim (don’t use twill tape as it will ravel)

2 1/2 yards white

1/2 yard red (to make in all white add this to the length above)

Aluminum jewelry wire – 16 gauge – 72”

1 size 1 hook

Needle and thread to match

Ruler or tape measure

Sunbonnet Sue

She’s had a hard life

This little gal is a doll I am calling Sunbonnet Sue. I adopted her from (where else) eBay and I think she has had it rough. But I couldn’t resist her interesting features – most importantly her bonnet. The bonnet is part of the china head, and I have a lot to learn abut these fascinating dolls called Bonnet Heads.

So forlorn

But first a tiny bit about Sue. She is about 11″ tall from tip to toe. Her china pieces are not glossy, leading me to think this is the type of material called bisque. She has been painted and assembled quite poorly. Everything about her is a little sad, honestly.

Weird discoloration

There is this strange discoloration on the fabric used to make her, which feels to me like skirt lining of all things. It’s slippery. I suppose whoever made her used whatever scraps they had laying around the sewing room. You can also see that her head was attached rather inexpertly. The center seam of her body is pulled off center toward her shoulder. Even worse, her body shape is really off. Her left leg is somewhat toward the center of her body and her right leg is offset to be under her outside of her shoulder. Poor Sue. You can also see that her feet and hands were attached badly and the dear girl is pigeon toed.

I’m ready to get dressed now, please

She came to me naked (as they almost always do) and I just feel for this girl. She is another perfectly imperfect doll, who has a ton of character, and who I will give a good home & decent clothing. :-)

My modesty has been preserved!

She perfectly fits the chemise I had made for Nell ages ago and it is a better fit here, plus the drawstring neckline works well with her large head. As I was working with Sue, one of her arms came off! The arms and legs were attached with wire, which I had not seen before – but that isn’t saying much, I am really new to doll acquisition. I was able to reattach her arm and also secured her other arm as a precaution.

Pretty and simple

But now she is ready to relax and rest, well clothed! I love this fabric – it’s a bit brighter in person than in the photo. I have learned these bonnet-head dolls were styled to the 1830s, and the fabrics at that time were bright and cheery, which is why I chose this. The great thing about a tiny doll like this is you can make a complete dress from a fat quarter and have fabric left over for something else. In the dress, you can’t really see the problems with Sue’s construction, although it looks a bit like she has her hip cocked out to the side. Maybe she’s throwing a 180 year attitude.

I asked in a doll collectors group about bonnet-head dolls and learned that the originals were created around 1900. There are a tremendous variety of bonnet-head styles, but Sue seems to be styled off this particular type:

Bonnet-head doll

As you can see, however, she was not painted with such care. During the 1980s, there were numerous kits (and they are still available on occasion on eBay) mass produced for consumers to create. My suspicion is that Sue was born during that era. It is unfortunate that her painting was not done with great detail, but I think I will enjoy her all the same. She is now safely nestled in my cabinet with some other dolls in my growing collection.

Here is an article about bonnet head dolls – much better written by people much more knowledgeable than me.

Hats Off to Bonnet-Heads via RubyLane.com

Meet Hannah

Buy this book immediately!

I don’t think you need a picture of Hannah in her underclothes – at this point, dolls in chemises, underbodices, or drawers is just redundant, don’t you think? Suffice to say I used the underbodice & drawers patterns from the 1875 La Mode Illustree that I mentioned in my last post about Emma, and the underbodice fits Hannah much better than Emma’s does. A while back, I picked up a copy of Sewing Victorian Doll Clothes by Michelle Hamilton. This lovely book covers 1840 through 1910, and includes not only a study of the various doll styles available during that timespan, but also some well designed and detailed patterns. The tricky thing is that to make the patterns fit in the book, they have to be printed quite small, and then the user was intended to enlarge the pattern on a copy machine. Since I don’t have a copy machine handy, but I do have a scanner, I went with that method, heh. You can see in the picture all the tabs I have added to this resource – I have a lot of plans for my dolls!

It was really tricky to decide what to make for my latest doll, Hannah. I created her from another Tasha Tudor doll kit, and technically she is named Meg. But she doesn’t look like a “Meg” to me, hence the name change. She is quite short, only about 11 1/2″ tall, which creates some issues based on her diminutive size. The patterns in the book were intended for dolls closer to 20″. But, I’m clever and capable, so off we went.

The photo on the left is an original doll made during the 1870s and featured in the book. She is truly lovely and I loved her bustle dress. The photo on the right is an extant dress from the same time period and was another inspiration for me. I had this French blue silk that I had bought years ago. Literally, I have been toting it around for three houses now, so it’s about time I used it. I also recently acquired some gorgeous gold silk taffeta from FarmhouseFabrics.com. They have a great selection of heirloom quality goods, plus they have doll “kits” of fabric and trims in coordinated colors. The gold silk taffeta came from one of those kits.

Hannah is so beautiful!

I think I really need to step up my photo game because I don’t think these are going to do her any justice.

The dress is made in three parts: bodice, skirt and apron. Oh, and there is a bustled petticoat underneath. Each piece is made exactly as clothing in the 1870s was made, so the bodice is lined, darted, and opens in front. If Hannah were bigger, I could have made functional buttons and buttonholes. As it was, she is just too small to even use 1/4″ buttons for decoration, so I used some hematite beads here. The original dress had tiny pleated trims, but Hannah is so small I had difficulty with my patience on the pleated skirt trim, so I decided to forego that. Besides, I loved the cuffs on the extant gown above and wanted to replicate that look. The thing about this era is that you could trim and trim and trim some more, and it would all be ok!

Close up of bodice & watch

I even made her little hat – something I had never done before! It was tricky, but I’m pleased with the result for the most part. I had wanted a feather, but not having one and not wanting to go shopping for one feather, I decided to fray out some silk instead. Her little watch came from Dollspart.com. I don’t know if you can tell, but the original doll had a little watch which is where I got this idea. I was literally obsessed with finding a doll sized watch for about 24 hours, searching jewelry supply websites for something I could make into a pendant for her, so it was a massive relief to find this website.

I quite like the results of this dress project. There are a few things I could have done better or differently, but all in all, I’m pleased. Again, I know where the mistakes are and I have to try to forget them. My sister would tell me they create the character and personality of the doll, so that’s my story and I’m sticking to it!

This project was the inspiration for a planning book. If you make doll clothes (or really any type of big project with a lot of parts or steps) I highly recommend doing this. I jot down different ideas for the various dolls I have on my project list. The list is getting long and really, I had forgotten about one doll, so I thought this would organize me better. I keep the book handy – since I work from home I can keep it right on my desk to grab when inspiration hits me. As I browse various photo galleries, I screen shot or save inspiration pictures and then paste them into the book with the doll I have in mind.

The book I am using is a Moleskin with the elastic band that keeps it closed – necessary since it is getting fat with all the added pictures – but any kind of blank book or journal would work.

This dress along with several others was also part of the impetus for me to redesign my office/sewing room and add a glass fronted cabinet. Now my dolls don’t have to stay in a drawer and I can look at them for inspiration or just satisfaction of my work.

Next time you visit, I will tell you all about Sunbonnet Sue, another interesting doll adopted off eBay with lots of issues that make her special. See you then!

Emma and the purple polyester

Hi, I’m Emma

Emma is another Tasha Tudor doll I acquired off eBay. Someone is selling a kit to make an Emma for something like $50 but I found this complete doll for only $20. Such a deal – I don’t have to build her!

Emma is dated 1974. I imagine she was made around that time based on this dress. It is polyester. Not today’s polyester- this IS your grandma’s polyester.

The outfit consists of the dress, a net underskirt, polyester drawers and a hat. None of the doll kits included much dress fashion – just basic patterns and sketchy instructions. I always wonder about the person who made the doll, her clothes and their knowledge. Did they have a book? And old doll to copy?

While it was sewn competently, it’s POLYESTER! 😆 there’s no way Emma can continue to wear this. But don’t worry, I have something in mind. Since Emma is styled as a youth doll (instead of a lady doll) I am working on a cute 1876 outfit styled from La Mode Illustree. Come back soon and I’ll tell you all about her new clothes from the muslin out.

Dressing Florence

A few weeks ago I told you about building the lovely Florence Nightengale doll from Yield House. Thankfully, Florence hasn’t been sitting in her underclothes since I completed her. I was very focused on the project and spent about a week making her dress.

I decided that since Florence was a known person I would do my best to recreate a dress she wore. A photo search resulted in this image, dated to 1857.

Florence, age 37

Although we don’t really know what color her dress was, I felt that an homage to the somber nurses dress might work well. I found some gorgeous lightweight charcoal wool from MiniMagic.com. They have tons of doll appropriate fabrics, trims and more.

Studying the dress, I figured the original velvet bands were probably 2 inch wide pieces. Of course in doll scale that would not work, so I purchased 3/8” velvet trim.

Secondly, I knew I would not be able to reproduce the turned back sleeves on such small scale. I would have to compromise on that.

And granted, the dress would be made to open in the back as a doll dress, so the sharp point on the waist would also not materialize.

But, I think I did a pretty good job.

Florence, dressed

Since 1/8” velvet trim doesn’t exist that I could find, I embroidered the bars in between the velvet bands on the skirt and on the bodice.

I made her undersleeves from a fine white batiste that I had and used some delicate lace. I am not thrilled with the black ribbon in the casings, but I’m not going to remake them. As was done in her day, the undersleeves tie on just above her elbow.

The lace for her collar I had left from another project. I used a tiny medallion for the center embellishment.

I’m quite pleased with Florence Nightengale! Come back again and I’ll tell you all about Emma and her purple polyester dress.

Pattern Review: TV 447 1863 Sheer Dress

I have been sitting on this pattern for several years, all while sweltering in the summer heat. I purchased my fabric easily three years ago and have been wanting a sheer dress for probably five years. Summer in multiple layers of clothing is definitely more warm than it has to be! So, this past spring, I finally decided to just do it! I have researched various patterns available on the market, including some Big Three patterns, Peachtree Mercantile, and others, but I know that Truly Victorian makes beautiful, accurate, and easy to follow patterns, which is why I settled on this one.

Truly Victorian TV447 1863 Sheer Dress

Truly Victorian TV447 1863 Sheer Dress

I chose a lovely sheer cotton in blue and white stripes that I found on clearance at a chain store. I know of more than one person who has made a sheer of this fabric. Hopefully we won’t all be at the same event together!

Pretty pretty

Pretty pretty

The fabric is 54″ wide, but since at the time I didn’t know what pattern I would be using I purchased 10 yards. Lucky for me, this overestimation was a good one. The sleeves on this dress are full and wide, plus since my fabric was directional, I was able to cut the stripes going from shoulder to wrist. Anyway, before any of that, I calculated my measurements and pattern size following the instructions on the pattern. The thing about the TV patterns is they allow you to custom fit your garment before you even start sewing. And once you do that, you can easily make up a muslin for a better idea on fit.

Dark image of my muslin

Dark image of my muslin

Sorry this is not better quality, but almost all the mirrors in my house that are big enough are impacted by light diffusion. What I learned here is that the waist of the under bodice was a little too full but the bust was a pretty good fit. So I took in the darts a bit and retested it. I did not do this all by myself, by the way. I submitted my questions to the Civilian Civil War Closet group on Facebook for hints and help – there are clothing historians, professional seamstresses and experienced clothiers there who are willing to help for free. I just couldn’t overlook that knowledge base. I also asked my friend Shelley Peters for real world tips as she has made this pattern a lot. Had I needed it, the amazing Heather McNaughten at Truly Victorian would have helped too. As an aside, this just confirms for me that this community really wants its members to succeed!

Anyway, after the changes to the muslin, I traced that as my new under bodice pattern piece and went forth to sew! This is the first time I have made my own bias and bias piping, which was used on the neckline facing and armscyes. I found the instructions sufficient, but had used better instructions on a Simplicity costume pattern and did that instead. They just made a bit more sense to my thinking, the result is the same.

IMG_2434

Piped facing to finish the raw edges of the under bodice.

IMG_2439

Piped armscye

The construction of the garment is for the most part very easy. I found the TV method of inserting the sleeve into the armscye backwards to what I am used to so I just adapted and made notes on the pattern.

Hand buttonholes

Hand buttonholes

I sewed this in a combination of machine and hand sewing. My fabric was so very delicate that even though I have a high quality machine, it sometimes would bunch up in the feed dogs. I wound up hand sewing much of the finishing stitching, such as on the piped facings, and also hand sewed all the button holes. My reasoning here was twofold – I wanted historically accurate buttonholes and since the fabric was so delicate it was impossible for me to machine sew them to the standard I desired. I used silk thread for the buttonholes. The buttons are vintage shell buttons, much higher quality than the cheap flaked mother of pearl available these days. They were purchased through Farmhouse Fabrics.

IMG_2441

Sleeve band

For visual interest I cut the sleeve band on the bias. Maybe there is a chance of this stretching over time, but the band is so generous around the wrist that I don’t expect that to happen.

IMG_1985

Finished bodice

At this point, I went back to the Civilian Civil War Closet for help. The pattern does not include a collar pattern. I don’t care for my look without a collar, so I googled for tutorials. The best suggested laying the pattern pieces for the bodice front and back together as though they were sewn, then tracing the curve from center front to center back, next extending that to a simple collar width. I did that, but found mine to be fluttery and off. The amazing Liz Clark of the Sewing Academy helped me immensely with tips on how to correct this and redraft the collar. I’m delighted to say that I was successful!

IMG_2438

Finished collar

I added the fine tatted lace which I purchased at Farmhouse Fabrics.

Next, waistband finishing. Since my fabric is 54″ wide, I didn’t want to cut it down to  four 40″ panels to follow the TV skirt instructions. I retained the selvages as was done in historical garments, and used three panels instead of four. The skirt has a very deep pocket at the center left where the skirt pieces overlap with the waistband. Each panel was cut to the same length, but since your skirt front and skirt back are different lengths, there has to be a way to do this without cutting your fabric. Again, drawing on the Closet knowledge, I did as was suggested and folded over the waist edge of the fabric. This gave added stability to the fabric as well as achieving the lengths needed. The pattern instructions have you cut your fabric at the waist to the desired angle which will give you your length. I don’t recommend that on a sheer just because of the off chance of it tearing.

IMG_2446 -1

Waist inside

You can see in this very amateurly photoshopped picture the angle of the folded-over fabric. This is center back where the skirt is a bit longer than in the front.

IMG_2443

Double box pleats

For the skirt attachment, the pattern gives you liberty to choose your preferred pleating or gathering method. Here I am showing you the double box pleats I used to pleat the skirt onto the waistband. Originally I had knife pleated the front and cartridge pleated the back, but I didn’t get enough fabric taken up in the front. So I went to the double box pleats in front and cartridge pleats in back. I’m quite happy with this look as it’s smooth and polished.

IMG_2445

Yes that hem is hand stitched

I wanted to make sure that the hem folded straight up so the lines didn’t go off kilter, so I ended up hand sewing the hem. I used a single thread and every fourth stitch went through all layers. Every 8th stitch was taken twice to keep the thread from coming undone if it were to break for any reason. If you kept up with my thinking on the skirt width, you will realize that’s a 178″ hem. It took me a couple hours to do it.

IMG_2447

Picture taken by an 8 year old

This is the finished dress, although it’s not the best picture of me lol. I’m looking down toward my daughter haha. Also, I realize that I must not have been laced as tightly in my corset as usual because I couldn’t fasten the waistband correctly. I wasn’t going to mess with it today and I’m certainly not taking the dress apart, so I’ll have to lace better next time.

IMG_2450 (1)

Side image

Here you can see the under sleeve just below my shoulder. This makes the dress very cool and airy. I had considered adding a silk stripe down the sleeve for interest, but I decided against it as it might weigh down the fabric. I may make a belt, as the silk I have is the exact color of the darkest stripe in the fabric.

You can also see the shadow of my petticoat under the skirt. I have an eyelet petticoat with two large pleats in it. This isn’t an historically accurate petticoat and someday I will make a plain cotton one, but for now this is quite pretty.

Overall I am thrilled with the result of the Truly Victorian TV447 Sheer Dress pattern. The instructions were easy, but true to the sewing techniques available to our ancestresses. It is not a pattern for a beginner, certainly, but if you have some knowledge of sewing, you can make this pattern truly customized to your preferences. If at times the instructions don’t make sense, just take them one sentence at a time. My mother told me when in doubt just do what the instructions say. These patterns will not take you down the wrong path, trust them and you will get something incredibly beautiful. And of course, email them, ask your friends who have made the pattern, or google for help. Truly Victorian patterns are very popular due to them being among the best on the market today, so lots of people make them! I am eager to wear this dress to one of our hottest events coming up soon, Huntington Beach Civil War Days.

Links & Resources

Truly Victorian

Farmhouse Fabrics

Civilian Civil War Closet

Sewing Academy

Huntington Beach Civil War Days

Mid Century Drawers

No, not drawers, drawers!

IMG_7378

They fit – whew!

Undergarments in the past, the sort of thing that covers your backside, were called drawers. While I can’t find a definitive source, most people are speculating that long underwear type garments were called drawers because they were drawn up the body (as in drawing the curtains closed, drawing up your chonies). At least since the later 1500s, drawers referred to what we now call interchangeably pantaloons, bloomers*, underwear, pantalettes, underpinnings, unmentionables, linens, etc. During the mid 19th century, they were called drawers, and so that is what I will be calling them here. The item was designed to keep a person’s legs covered, both for modesty as well as cleanliness. Typical drawers for girls reached to the mid calf.

For my Mid Century Sewing Project, previously I made the child’s chemise, and almost immediately went onto the drawers. The pattern consists of one piece cut twice on a fold, and then a small portion is cut away from only half of it, creating a distinct left and right leg. Since I had surprised myself in enjoying the hand sewing so much making the chemise, I decided to make the drawers in a combination of hand and machine sewing. Around the crotch area, I hand sewed the seams and felled them so they would not ravel. I chose to make closed crotch drawers for Melody’s modesty. The legs came together so easily, I hardly need to explain anything. My only caveat is that if your child has hips wider than the waist, you will want to cut the pattern to the hip measurement, not the waist measurement. You can see in the picture above that although these drawers fit Melody, a bit more ease in the hips might serve her nicely.

Next I added the growth tucks. I put in three tucks, and it should be noted, I lengthened the pattern by 3 inches in order to have the tucks! This girl is tall. :-) I did not add any embellishment to the hem of the drawers. The pattern suggests white embroidery in between the tucks, but my embroidery is laughable at best! Auntie might be playing with this at the next event we do together haha.

Once the side seams and plackets were prepared, I attached the waist bands. The drawers have two bands – a front and a back – which button together at the sides. For the front treatment, I pleated the drawer body onto the waistband for a more flat front. On the back I gathered the fabric and also decided on a semi-adjustable waistband. The semi-adjustable waistband is made with a short drawstring inside so the band lays relatively flat, but can allow for a bit of ease. Although the pattern called for cotton tape as the drawstring, I didn’t have any so I used cotton cord. Also, I learned how to make hand stitched eyelets! These were easy and look so nice.

Hand stitched eyelets

Hand stitched eyelets

IMG_7368

Untied drawstrings

IMG_7369

Bound ends of the cords

Here I chose to bind the ends of the cords with thread. Since it is cotton cord, it can’t be warmed to create an aglet. But also since it is cotton cord, I didn’t want it to unravel.

IMG_7366

Finished semi-adjustable waistband

Once this was finished I went on to learn how to sew a buttonhole. Mine are not quite attractive yet, but they are functional, heh.

Button button

Button button

I found in my stash two nice 1/2″ shell buttons. Perfect! Modern mother of pearl is so thin, but these will be sturdy for use by a busy little girl. Around about this point, I was asked to give Melody her first sewing lesson. I am delighted that she is interested, and she did a great job for her first attempt!

IMG_7349 IMG_7348 IMG_7350 IMG_7351

Finally, the drawers are finished. Here they are paired with the chemise and a child’s cage that I picked up second hand from another reenactor. The cage is from the Originals by Kay line and are known to be historically accurate. I have to make a minor alteration to it. The previous owner added a button & buttonhole, but it’s a bit snug for Melody’s waist. So, I’m adding a short extension to cover and strengthen the previous buttonhole and give us another inch on the waistband.

IMG_7384

Altogether now

Next up will be the stays. Melody asked for them specifically, and I figure if I’m going to do this, I better do it right and how she wants it!

* Bloomers in the 19th century were a type of pants, not drawers or undergarments, that were worn underneath skirts, and touted as a progressive manner of dressing. They were originally introduced in the 1850s by Elizabeth Smith Miller, and based on the harem pants and other types of loose trousers worn in Asian countries. Mrs Amelia Bloomer popularized the garment through her own wearing of them as well as advertising and writing about them in her newspaper. She was also known as a “radical” because she believed women should have the right to vote in national elections and that alcohol should be outlawed. And she was radical for her time! She owned a newspaper specifically for women; she served on the Iowa Suffrage Committee; she was friends with other reformers, such as Elizabeth Cady Stanton and Susan B. Anthony. Mrs Bloomer helped women take on the rights we all enjoy today.